TM 500A75 Design "A"
Type  HP  Belt speed in feet per minute (ft/min)
Belt pull in lbs

min. "L" inches
Design A
 Weight at
L = 33.46
in lbs. 
TM 500A75 - 440

40.0
 744 591 472 378   (ft/min)

33.46

1,100
1777 2231 2795 3491   (belt pull)
TM 500A75 - 430

30.0
 744 591 472 378   (ft/min)

33.46

1,100
1241 1563 1954 2443   (belt pull)
TM 500A75 - 425

25.0
 744 591 472 378 312* (ft/min)

33.46

1,078
1043 1315 1643 2054 2490 (belt pull)
TM 500A75 - 620

20.0
 472 378 295 236   (ft/min)

33.46

1,100
1332 1665 2132 2665   (belt pull)
TM 500A75 - 815

15.0
 378 295 236 189   (ft/min)

33.46

1,100
1221 1563 1954 2443   (belt pull)

* Please contact VDG Technical Dept. for use of these speeds.

  • The total weight of a unit increases by 14.39 lbs. per inch.
  • Other belt speeds and facewidths are available.
  • When the drive is supplied with lagging, the covered facewidth is reduced by 1.97 inches.

NOTE: TM 500 type drum motors are available in all standard voltages and are also electrically reversible.


Motorized Pulley - Coal  Motorized Pulley - Salt  Motorized Pulley - Auto  Motorized Pulley - Rock  Motorized Pulley - Food  Motorized Pulley - Cheese 
Distributed by Conveyor Systems & Components Co.|1-800-255-4512 |info@vandergraafNet.com .