TM 315 (2 OF 2)
 Type

 HP  
 Belt speed in feet per minute (ft/min)
belt pull in lbs

min. "L" inches
Design

 Weight at
L = 23.62
in lbs. 
 A  B
TM 315 - 63

3.0
 343 279 253 203     (ft/min)

19.69

21.65

282.2
270 332 366 456     (belt pull)
TM 315 - 63V

3.0
 158 120         (ft/min)

19.69

21.65

282.2
585 769          (belt pull)
TM 315 - 63 ZV

3.0
 111 94 87 76     (ft/min)

19.69

21.65

282.2
834 980 1058 1221     (belt pull)
TM 315 - 83

3.0
 250 206 187 149 116 87 (ft/min)

19.69

21.65

291.0
371 450 497 623 800 1059 (belt pull)
TM 315 - 83

3.0
 80 71 66       (ft/min)

19.69

21.65

291.0
1154 1307 1406       (belt pull) 
TM 315 - 83 ZV

3.0
 59           (ft/min)

19.69

21.65

291.0
1568           (belt pull)
TM 315 - 82

2.0
 250 206 187 149 116 87 (ft/min)

19.69

21.65

291.0
247 300 331 415 533 706 (belt pull)
TM 315 - 82 Z

2.0
 80 71 66       (ft/min)

19.69

21.65

291.0
769 871 937        (belt pull)
TM 315 - 82 ZV

2.0
 59           (ft/min)

19.69

21.65

291.0
1045           (belt pull)
TM 315 - 122

2.0
 163 132 120 94 76 57 (ft/min)

19.69

21.65

291.0
379 467 512 653 806 1089 (belt pull)
TM 315 - 122 Z

2.0
 52 45 40       (ft/min)

19.69

21.65

291.0
1188 1376 1548       (belt pull)
TM 315 - 122 ZV

2.0
 38           (ft/min)

19.69

21.65

291.0
1633           (belt pull)
TM 315-815

1.5
 250 206 187 149 116 87 (ft/min)

19.69

21.65

282.2
185 225 248 311 400 530 (belt pull)
TM 315 - 815 Z

1.5
 80 71 66 59     (ft/min)

19.69

21.65

282.2
576 653 702 784     (belt pull)
  • The total weight of a unit increases by 3.92 lbs. per inch.
  • Other belt speeds and facewidths are available.
  • When an electromechanical brake is required, the minimum facewidth is increased by 5.91 inches.
  • When the drive is supplied with lagging, the covered facewidth is reduced by 1.18 inches.

NOTE: TM 315 type drum motors are available in all standard voltages and are also electrically reversible.

Distributed by
Conveyor Systems & Components Co.