TM 315 (1 OF 2)
 Type

 HP  
 Belt speed in feet per minute (ft/min)
Belt pull in lbs

min. "L" inches
Design

 Weight at
L = 13.78
in lbs. 
 A  B
TM 315-410

10.0
 959 787           (ft/min)

21.65

23.62

299.8
321 392           (belt pull)
TM 315 - 410 V

10.0
 709 567  444  335        (ft/min)

21.65

23.62

299.8
436 544 695 920       (belt pull)
TM 315-410-ZV

10.0
 309 267 222 168* 144*     (ft/min)

21.65

23.62

299.8
997 1156 1391 1837 2144     (belt pull)
TM 315 - 475

7.5
 959 787           (ft/min)

21.65

23.62

299.8
241 294           (belt pull)
TM 315 - 475 V

7.5
 709 567 444 335       (ft/min)

21.65

23.62

299.8
327 408 521 690       (belt pull)
TM 315 -475 ZV

7.5
 309 267 222 168* 144* 132* 120* (ft/min)

21.65

23.62

299.8
748 867 1043 1378 1608 1754 1930 (belt pull)
TM 315 - 455

5.5
 959 787 709 567 520     (ft/min)

19.69

21.65

291.0
177 216 240 299 327     (belt pull)
TM 315 - 455 V

5.5
 425 385 307 241 182     (ft/min)

19.69

21.65

291.0
399 441 553 705 933     (belt pull)
TM 315 - 455 ZV

5.5
 168 144 132 120*       (ft/min)

19.69

21.65

291.0
1012 1178 1285 1413       (belt pull)
TM 315 - 65

5.0
 631 517 465 373 343     (ft/min)

19.69

21.65

291.0
245 299 331 414 450     (belt pull)
TM 315 - 65V

5.0
 279 253 203 158       (ft/min)

19.69

21.65

291.0
554 610 760 975       (belt pull)
TM 315 - 65 ZV

5.0
 111 94 87 76*       (ft/min)

19.69

21.65

291.0
1390 1634 1765 2021       (belt pull)
TM 315 - 44

4.0
 520 425 385 307       (ft/min)

19.69

21.65

282.2
238 290 321 402       (belt pull)
TM 315 - 44 V

4.0
 241 182           (ft/min)

19.69

21.65

282.2
512 679           (belt pull)
TM 315 -44 ZV

4.0
 168 144 132 120       (ft/min)

19.69

21.65

282.2
736 857 934 1025       (belt pull)
TM 315 - 64

4.0
 631 517 465 373 343     (ft/min)

19.69

21.65

291.0
196 239 265 331 360     (belt pull)
TM 315 - 64 V

4.0
 279 253 203 158       (ft/min)

19.69

21.65

291.0
443 488 608 780       (belt pull)
TM 315 - 64 ZV

4.0
 111 94 87 76*       (ft/min)

19.69

21.65

291.0
1112 1307 1412 1617       (belt pull)
TM315 Table (2 of 2)

* Please consult VDG Technical Dept. for use of these speeds.

  • The total weight of a unit increases by 3.92 lbs. per inch.
  • Other belt speeds and facewidths are available.
  • When an electromechanical brake is required, the minimum facewidth is increased by 5.91 inches.
  • When the drive is supplied with lagging, the covered facewidth is reduced by 1.18 inches.

NOTE: TM 315 type drum motors are available in all standard voltages and are also electrically reversible.

Distributed by
Conveyor Systems & Components Co.