TM 273 (2 OF 2)
 Type  HP   Belt speed in feet per minute (ft/min)
Belt pull in lbs		 min. "L"
inches
Design A		 Weight at
L = 19.69
in lbs. 
TM 273-61

1.00
 408 337 273 246 198 174 152 144 117 (ft/min)

16.73

250.0
81 98 121 134 167 190 218 230 283 (belt pull)
TM 273 - 61 Z

1.00
 108 102 93 84 77         (ft/min)

16.73

250.0
306 324 355 393 429         (belt pull)
TM 273 - 81

1.00
 300 246 201 180 144 130 114 99 84 (ft/min)

16.73

254.4
110 134 164 183 229 254 289 333 393 (belt pull)
TM 273 - 81 Z

1.00
 77 75 69 64           (ft/min)

16.73

254.4
429 440 479 516           (belt pull)
TM 273 - 81 ZV

1.00
 57                 (ft/min)

16.73

254.4
579                 (belt pull)
TM 273 675

0.75
 408 337 273 246 198 174 152 144 117 (ft/min)

16.73

245.6
61 74 91 101 126 143 164 173 213 (belt pull)
TM 273 - 675 Z

0.75
 108 102 93 84 77         (ft/min)

16.73

245.6
229 243 266 295 321         (belt pull)
TM 273 - 875

0.75
 300 246 201 180 144 130 114 99 84 (ft/min)

16.73

250.0
83 101 123 138 172 190 217 250 294 (belt pull)
TM 273 875 Z

0.75
 77 75 69 64 57         (ft/min)

16.73

250.0
321 330 358 386 434         (belt pull)
TM 273-1275

0.75
 192 159 128 117 93 84 72 64 55 (ft/min)

16.73

254.4
129 156 194 212 266 295 344 387 450 (belt pull)
TM 273 - 1275 Z

0.75
 51 48 44 42 36         (ft/min)

16.73

254.4
485 516 563 589 689         (belt pull)
TM 273 805

0.50
 300 246 201 180 144 130 114 99 84 (ft/min)

16.73

245.6
55 67 82 92 114 127 145 166 196 (belt pull)
TM 273 - 805 Z

0.50
 77 75 69 64 57         (ft/min)

16.73

245.6
214 220 239 258 289         (belt pull)
TM 273 1205

0.50
 192 159 128 117 93 84 72 64 55 (ft/min)

16.73

254.4
86 104 129 141 177 197 229 258 300 (belt pull)
TM 273 - 1205 Z

0.50
 51 48 44 42 36         (ft/min)

16.73

254.4
323 344 375 393 459         (belt pull)
  • The total weight of a unit increases by 2.52 lbs. per inch.
  • Other belt speeds and facewidths are available.
  • When an electromechanical brake is required, the minimum facewidth is increased by 3.94 inches.
  • When the drive is suuplied with lagging, the covered facewidth is reduced by 1.18 inches.

NOTE: TM 273 type drum motors are available in all standard voltages and are also electrically reversible.


Motorized Pulley - Coal  Motorized Pulley - Salt  Motorized Pulley - Auto  Motorized Pulley - Rock  Motorized Pulley - Food  Motorized Pulley - Cheese 
Distributed by Conveyor Systems & Components Co.|1-800-255-4512 |info@vandergraafNet.com .