TM 215 (2 OF 2)
 Type

 HP  
 Belt speed in feet per minute (ft/min)
Belt pull in lbs

min. "L" inches
Design

 Weight at
L = 19.69
in lbs. 

 A

 B
TM 215 - 61

1.00
 321 265 215 194 156 137 120 113 92 (ft/min)

16.73

19.69

150.10
96 117 144 159 198 225 256 272 335 (belt pull)
TM 215 - 61 Z

1.00
 85 80 73 66 61         (ft/min)

16.73

19.69

150.10
363 384 421 467 503         (belt pull)
TM 215 - 81

1.00
 236 194 158 142 113 102 90 78 66 (ft/min)

16.73

19.69

154.50
131 159 195 218 272 304 344 396 467 (belt pull)
TM 215 - 81Z

1.00
 61 59 54 50           (ft/min)

16.73

19.69

154.50
503 523 568 622           (belt pull)
TM 215 - 81 ZV

1.00
 45                 (ft/min)

16.73

19.69

154.50
688                 (belt pull)
TM 215 - 675

0.75
 321 265 215 194 156 137 120 113 92 (ft/min)

16.73

19.69

145.70
72 87 108 120 148 169 192 204 251 (belt pull)
TM 215 - 675 Z

0.75
 85 80 73 66 61         (ft/min)

16.73

19.69

145.70
272 288 316 350 377         (belt pull)
TM 215 - 875

0.75
 236 194 158 142 113 102 90 78 66 (ft/min)

16.73

19.69

150.10
98 120 146 163 204 228 258 297 350 (belt pull)
TM 215 - 875Z

0.75
 61 59 54 50 45         (ft/min)

16.73

19.69

150.10
377 392 426 467 516         (belt pull)
TM 215 - 1275

0.75
 151 125 102 92 73 66 57 50 43 (ft/min)

16.73

19.69

154.50
153 185 228 252 317 350 408 467 545 (belt pull)
TM 215 - 1275 Z

0.75
 40 38 35 33 28         (ft/min)

16.73

19.69

154.50
576 612 654 701 816         (belt pull)
TM 215 - 805

0.50
 236 194 158 142 113 102 90 78 66 (ft/min)

16.73

19.69

145.70
65 80 98 109 136 152 172 198 233 (belt pull)
TM 215 - 805 Z

0.50
 61 59 54 50 45         (ft/min)

16.73

19.69

145.70
251 261 284 311 344         (belt pull)
TM215 - 1205

0.50
 151 125 102 92 73 66 57 50 43 (ft/min)

16.73

19.69

154.50
102 123 152 168 211 233 272 311 363 (belt pull)
TM215 - 1205 Z

0.50
 40 38 35 33 28         (ft/min)

16.73

19.69

154.60
384 408 436 467 544         (belt pull)
  • The total weight of a unit increases by 2.52 lbs. per inch.
  • Other belt speeds and facewidths are available.
  • When an electromechanical brake is required, the minimum facewidth is increased by 3.94 inches.
  • When the drive is supplied with lagging, the covered facewidth is reduced by 1.18 inches.

NOTE: TM 215 type drum motors are available in all standard voltages and are also electrically reversible.

Distributed by
Conveyor Systems & Components Co.