TM 215 (1 OF 2)
 Type  HP   Belt speed in feet per minute (ft/min)
Belt pull in lbs

min. "L" inches
Design

 Weight at
L = 19.69
in lbs. 

A

B
TM 215-255 5.50 1369 1128 921 831 666 590           (ft/min)

 19.69 

 21.65 

  161.1
124 149 182 202 252 284           (belt pull)
TM215-255 ZV 5.50

472

406

364

340

312

             (ft/min)

 19.69 

 21.65 

  161.1
355 413 461 494 538             (belt pull)
TM 215 - 44 4.00 685 565 461 416 333 295           (ft/min)

19.69

21.65

161.1
180 219 268 297 371 418           (belt pull)
TM 215 - 44 ZV 4.00 236 203 182 170 156 144* 130* 120* 111* 102* 92* (ft/min)

19.69

21.65

161.1
523 608 679 726 792 858 950

1029

 1113 1211 1343 (belt pull)
TM 215 - 43 3.00 685 565 487 402 328 295 236 210       (ft/min)

16.73

19.69

154.5
135 164 190 231 282 314 392 440       (belt pull)
TM 215 - 43 ZV 3.00 168 144 130 120 111 102* 92*         (ft/min)

16.73

19.69

154.5
552 643 713 769 834 907 1006         (belt pull)
TM 215 - 63 3.00 451 371 321 265 215 194 156 137       (ft/min)

19.69

21.65

161.1
206 249 288 350 430 479 594 677       (belt pull)
TM 215 - 63 ZV 3.00 111 94 85 80 73 66 61*         (ft/min)

19.69

21.65

161.1

834

 980 1089 1154 1265 1400 1514         (belt pull)
TM 215 - 42 2.00 685 565 487 402 328 295 236 210 184 161   (ft/min)

16.73

19.69

150.1
90 109 127 154 188 209 261 294 335 384   (belt pull)
TM 215 - 42 Z 2.00 144 130                   (ft/min)

16.73

19.69

150.1
428 475                   (belt pull)
TM 215 - 42 ZV 2.00 120 111 102 92               (ft/min)

16.73

19.69

150.1
512 556 608 670               (belt pull)
TM 215 - 62 2.00 451 371 321 265 215 194 156 137       (ft/min)

19.69

21.65

161.1
137 166 192 233 287 319 396 451       (belt pull)
TM 215 - 62 ZV 2.00 111 94 85 80 73 66 61*         (ft/min)

19.69

21.65

161.1
556 653 726 769 843 933 1009         (belt pull)
TM 215 - 415 1.50 487 402 328 295 236 210 184 161 139     (ft/min)

16.73

19.69

145.7
95 115 141 157 196 220 251 288 332     (belt pull)
TM 215 - 415 Z 1.50 130 120 111 102 92             (ft/min)

16.73

19.69

145.7
356 384 417 456 503             (belt pull)
TM 215 - 615 1.50 321 265 215 194 156 137 120 113       (ft/min)

16.73

19.69

154.5
144 175 215 239 297 338 384 408       (belt pull)
TM 215 - 615 Z 1.50 111 94 85                 (ft/min)

16.73

19.69

154.5
417 490 544                 (belt pull)
TM 215 - 615 ZV 1.50 80 73 66 61               (ft/min)

16.73

19.69

154.5
576 632 700 754               (belt pull)
TM 215 - 815 1.50 236 194 158 142 113 102 90 78 66     (ft/min)

19.69

21.65

161.1
164 199 243 272 340 380 430 495 584     (belt pull)
TM 215 - 815 Z 1.50 61 59 54 50               (ft/min)

19.69

21.65

161.1
629 654 710 778               (belt pull)
TM 215 - 815 ZV 1.50 45                     (ft/min)

19.69

21.65

161.1
860                     (belt pull)
TM 215 Table (2 of 2)

* Please consult VDG Technical Dept. for use of these speeds.

  • The total weight of a unit increases by 2.52 lbs. per inch.
  • Other belt speeds and facewidths are available.
  • When an electro-mechanical brake is required, the minimum facewidth is increased by 3.94 inches.
  • When the drive is supplied with lagging, the covered facewidth is reduced by 1.18 inches.

NOTE: TM 215 type drum motors are available in all standard voltages and are also electrically reversible.

Distributed by
Conveyor Systems & Components Co.