TM 160 (2 OF 2)

 Type

HP
 Belt speed in feet per minute (ft/min)
Belt Pull in lbs

min. "L"
inches Design

 Weight at
L = 13.78
in lbs. 

 A

 B
TM 160 - 805

0.50
 234 196 163 149 123 99 90 78 61 52 (ft/min)

13.78

15.75

67.10
66 79 94 104 125 156 172 199 251 297 (Belt Pull)
TM 160-805 Z

0.50
 50 47 40 35             (ft/min)

13.78

15.75

67.10
312 326 384 435             (Belt Pull)
TM 160 - 634

0.34
 312 262 217 198 163 132 118 106 83 71 (ft/min)

13.78

15.75

63.80
34 40 48 53 64 79 89 99 127 148 (Belt Pull)
TM 160 - 634 Z

0.34
 69 64 54 47             (ft/min)

13.78

15.75

63.80
153 165 193 222             (Belt Pull)
TM 160 - 834

0.34
 234 196 163 149 123 99 90 78 61 52 (ft/min)

13.78

15.75

67.10
45 54 64 71 85 106 117 135 171 202 (Belt Pull)
TM 160-834 Z

0.34
 50 47 40 35             (ft/min)

13.78

15.75

67.10
212 222 261 296             (Belt Pull)
TM 160 - 1225

0.25
 151 125 104 94 78 64 57 52 40 33 (ft/min)

13.78

15.75

67.10
51 61 74 82 99 121 136 149 192 233 (Belt Pull)
TM 160 - 1225 Z

0.25
 31 26 24               (ft/min)

13.78

15.75

67.10
251 297 326               (Belt Pull)
TM 160 - 818

0.18
 234 196 163 149 123 99 90 78 61 52 (ft/min)

13.78

15.75

63.80
24 28 34 37 45 56 62 71 90 107 (Belt Pull)
TM 160 - 818 Z

0.18
 50 47 40 35             (ft/min)

13.78

15.75

63.80
112 118 138 157             (Belt Pull)
TM 160- 1213

0.13
 151 125 104 94 78 64 57 52 40 33 (ft/min)

13.78

15.75

64.90
27 32 39 42 51 63 71 77 100 121 (Belt Pull)
TM 160 -1213 Z

0.13
 31 26 24               (ft/min)

13.78

15.75

64.90
131 154 170               (Belt Pull)
  • The total weight of a unit increases by 1.4 lbs. per inch.
  • Other belt speeds and facewidths are available.
  • When an electromechanical brake is required, the minimum facewidth is increased by 3.94 inches.
  • When the drive is supplied with lagging, the covered facewidth is reduced by 0.87 inches.

NOTE: TM 160 type drum motors are available in all standard voltages and are also electrically reversible.

Distributed by
Conveyor Systems & Components Co.