TM 160 (1 OF 2)
 Type HP Belt speed in feet per minute (ft/min)
belt pull in lbs

min. "L" inches
Design

 Weight at
L = 13.78
in lbs. 
A B
TM 160-22   2.0 935 782 652 593 489 397         (ft/min)

13.78

15.75

  67.10
66 79 95 104 126 156         (belt pull)
TM 160-22 Z  2.0 317                   (ft/min)

13.78

15.75

  67.10
195                   (belt pull)
TM 160-22 ZV  2.0 295 274 265 241 215 203 189       (ft/min)

13.78

15.75

  67.10
209 225 233 256 287 304 327       (belt pull)
TM 160-42 2.0 468 392 326 298 243 198         (ft/min)

13.78

15.75

 67.10
132 157 189 208 253 311         (belt pull)
TM 160-42 ZV 2.0 158 151 139 132 120 109 102 94 80* 73* (ft/min)

13.78

15.75

 67.10
391 408 443 467 512 568 608 653 825 904 (belt pull)
  TM 160-415 1.50 468 392 326 298 243 198         (ft/min)

13.78

15.75

  67.10
99 118 142 156 190 233         (belt pull)
TM 160 -415 ZV 1.50 158 151 139 132 120 109 102 94 80* 73* (ft/min)

13.78

15.75

  67.10
293 306 332 350 384 426 456 490 575 630 (belt pull)
TM 160-41 1.00 468 392 326 298 243 198 177 158     (ft/min)

13.78

15.75

64.90
66 79 95 104 127 156 174 195     (belt pull)
TM 160-41 Z 1.00 151 139 132 120             (ft/min)

13.78

15.75

64.90
204 221 233 256             (belt pull)
TM 160-41 ZV 1.00 109 102 94 80 73           (ft/min)

13.78

15.75

64.90
284 304 327 384 421           (belt pull)
TM 160-61 1.00 312 262 217 198 163 132 118       (ft/min)

15.75

15.75

67.10
99 117 143 156 189 233 261       (belt pull)
TM 160-61 Z 1.00 106 99 92 87 80           (ft/min)

15.75

15.75

67.10
291 311 335 353 384           (belt pull)
 TM 160-61 ZV 1.00 71 69 64 54 47*           (ft/min)

15.75

15.75

67.10
436 451 484 568 702           (belt pull)
TM 160-475 0.75 468 392 326 298 243 198 177 158 123   (ft/min)

13.78

15.75

  63.80
49 59 71 78 95 117 131 146 188   (belt pull)
TM 160-475 Z 0.75 120 109 102 94 80           (ft/min)

13.78

15.75

  63.80
192 213 228 245 288           (belt pull)
TM 160-475 ZV 0.75 73                   (ft/min)

13.78

15.75

  63.80
316                   (belt pull)
M 160-675 0.75 312 262 217 198 163 132 118       (ft/min)

13.78

15.75

  67.10
74 88 107 117 142 175 196       (belt pull)
TM 160-675 Z 0.75 106 99 92 87 80           (ft/min)

13.78

15.75

  67.10
218 233 251 265 288           (belt pull)
TM 160-675 ZV 0.75 71 69 64 54 47           (ft/min)

13.78

15.75

  67.10
327 338 363 426 489           (belt pull)
TM 160-605 0.50 312 262 217 198 163 132 118 106 83   (ft/min)

13.78

15.75

64.90
49 59 71 78 95 117 131 145 187   (belt pull)
TM 160-605 Z 0.50 80 71 69 64 54 47         (ft/min)

13.78

15.75

64.90
192 218 225 242 284 327         (belt pull)
TM160 Table (2 of 2)

* Please consult VDG Technical Dept. for use of these speeds.

  • The total weight of a unit increases by 1.4 lbs. per inch.
  • Other belt speeds and facewidths are available.
  • When an electromechanical brake is required, the minimum facewidth is increased by 3.94 inches.
  • When the drive is supplied with lagging, the covered facewidth is reduced by 0.87 inches.

NOTE: TM 160 type drum motors are available In all standard voltages and are also electrically reversible.

Distributed by
Conveyor Systems & Components Co.