TM 127
 Type

HP
 Belt speed in feet per minute (ft/min)
Belt Pull in lbs

min. "L" inches
Design

 Weight at
L = 13.24
in lbs. 

 A

 B
TM 127 - 410

1.0
 333 247 210 149* 118* 94* 75* (ft/min)

11.81

13.78

44.1
95 127 150 199 261 367 408 (Belt Pull)
TM 127 - 475

0.75
 333 247 210 149 118 94 75* (ft/min)

10.83

11.81

39.7
71 95 113 149 195 275 306 (Belt Pull)
TM 127 - 405

0.5
 333 247 210 149 118 94 75 (ft/min)

10.83

11.81

37.5
53 64 75 100 131 184 204 (Belt Pull)
TM 127 - 805

0.5
 59 47 38         (ft/min)

11.81

13.78

44.1
261 326 408         (Belt Pull)
TM 127 - 434

0.34
 333 247 210 149 118 94 75 (ft/min)

9.84

10.83

35.3
32 43 50 71 89 111 139 (Belt Pull)
TM 127 - 834

0.34
 59 47 38         (ft/min)

10.83

11.81

39.7
178 222 278         (Belt Pull)
TM 127 - 818

0.18
 59 47 38         (ft/min)

9.84

10.83

35.3
94 118 147         (Belt Pull)
TM 127 - 1218

0.18
 28 23           (ft/min)

11.81

13.78

44.1
196 235           (Belt Pull)
TM 127 - 1213

0.13
 28 23           (ft/min)

10.83

11.81

39.7
142 170           (Belt Pull)

* Please consult VDG Technical Dept. for use of these speeds.

  • The total weight of a unit increases by .84 lbs. per inch.
  • Other belt speeds and face widths are available.
  • When an electromechanical brake is required, the minimum facewidth is increased by 3.94 inches.
  • When the drive is supplied with lagging, the covered facewidth is reduced by 0.47 inches.

NOTE: TM 127 type drum motors are available in all standard voltages and are also electrically reversible.

Distributed by
Conveyor Systems & Components Co.