TM 100 Design "B"

Type	HP	Belt speed in feet per minute (ft/min) Belt pull in lbs									min. "L" inches Design B	Weight at L = 10.24 in lbs.
TM 100 - 425	0.25	416	333	295	262	232	203			(ft/min)	12.20	13.5
		17	22	24	27	31	35			(belt pull)
TM 100 - 425 Z	0.25	180	161	135	114	95	85	71	57	(ft/min)	12.20	13.5
		40	45	53	63	76	84	101	126	(belt pull)
TM 100 - 616	0 16	295	265	213	189	168	146			(ft/min)	12.20	13.5
		16	18	22	25	28	33			(belt pull)
TM 100 - 616 Z	0 16	116	97	85	71	61	45	35		(ft/min)	12.20	13.5
		41	49	56	67	78	106	135		(belt pull)
TM 100 - 416	0.16	262	232	203						(ft/min)	10.83	13.5
		18	21	24						(belt pull)
TM 100 - 416 Z	0.16	180	161	135	114	95	85	71	57	(ft/min)	10.83	13.5
		27	30	35	42	50	56	67	84	(belt pull)
TM 100 - 414	0.14	262	232	203						(ft/min)	10.24	13.5
		15	17	20						(belt pull)
TM 100 - 414 Z	0.14	180	161	135	114	95	85	71	57	(ft/min)	10.24	13.5
		22	25	30	35	42	47	56	71	(belt pull)
TM 100 - 611	0.11	189	168	146						(ft/min)	10.24	13.5
		17	19	22						(belt pull)
TM 100 - 611 Z	0.11	116	97	85	71	61	45	35		(ft/min)	10.24	13.5
		27	33	37	45	52	71	90		(belt pull)
TM 100 - 811 Z	0.11	64	52	45	40	33	26			(ft/min)	12.20	13.5
		50	61	71	79	96	128			(belt pull)

The total weight of a unit increases by .9 lbs. per inch. Other belt speeds and facewidths are available. When the drive is supplied with lagging the covered facewidth is reduced by 0.47 inches. NOTE: TM 100 type drum motors are available in all standard voltages and are also electrically reversible.